Shopping Cart
/ /

How To Make A Lace Frontal Wig Tutorial, very detailed

Dec 31,2021

Today, i come with the most requested tutorial of all time. How to make a lace frontal wig tutorial. Hope you all enjoy.

So for the products you will be using in this tutorial is a hair bundles . a lace frontal closure and manikin head. Some tape in, a curved needle and you also get a straight needle, wig comes, a scissors, pencil, hair clips, some thread, wig cap. Plastic band, basically this is everything you would need to make a wig, you wouldn’t need to leave your house. Click the website and go to  a hair solon.

If you’d like to see how to make your own personal wig, please keep going with this tutorial.

The first thing you need to do is to use the pancial a mapa roughly way your ears off. This is a guide to know where to place your frontal, place the wig cap on the manikin head, and hold it down with a tape in, place the wig cap inside out because you’ll need the hook to be on the outside of the cap, not on the inside. Using the customized lace frontal from Wendy Hair. I’ll start by securing it with the tip in where i’ve maxed the cap, remember everything it from Wendy Hair. Remeber to fold the lace before sewing for a clean finish, use a clip to move the hair out of the way. Before sewing, i start with sewing both end of the endges down of the frontal before i actually sewed the back this is just to keep the frontal in place. Use the white pencil from our wig kit to outline where to sew the frontal, this is just to make it easy for you to sew, again, use the dot clip to move the excess hair out of the way. I use a blanket stitch method to seal the frontal down. I do this by sew in under the lace, then over, about a half cetimeter apart and repeat this all the way through.

Let’s move on to sew in the bundles, the firt thing i do is pin down the wig cap using the tape in, this is just to make it easy for me to sew in , today i’ll be using 4 bundles of hair from Wendy Hair, i’ll be using 16,18,20,20 and a 14 inch frontal, for the bundle of the back, i doubled the weft i swore. I put the needle through the end of the weft and tie a knots, so where i doubled the weft stay in place. Hurry on with the blanket stitch that i showed you how to do at the beginning, remeber, i’m using the longgest length at the back which is 20 inches. When sew in the bundle at the back, make sure you saw the track very close to each other to achieve the volume at the bottom of your wig, besically say this doesn’t looks scanty or when you looking at the hair it whe looks thin at the end. We do not want that, remeber this is exactly how i make my own personal unit, my own personal frontal, this is not how i sew in my clients’ frontal, obviously with a client frontal, i need a proper wig converse and also i need tape measurement, i folloewd the measurement of their head, using pencial for my clients becaused onviously i’m professional enough, this is how to make your own personal unit, not how to make a professional unit.

You get the edge of the cap, you will need to use the fold of a method. For this method,you open up the double track sew it through the first and sew the second track directly on top, then fold over the track, and sew through all the weft together, do this twice to avoid bumps and to keep it very flat. If you finding it diffucult to sew on a straight line, then hold the weft in place and usethe pencial to outline where you need to sew and to make it even mroe easier. Use the tape in to keep the weft in place. When you get the top of the wig, start sewingin a curved line,it’s all in the current line and the stitching is all perfect. The track at the top near the frontal and the track at the back are sew in very closedly together,whilst the track in the middle. A finger width apart,to finish the track, sew through the weft twice and then make a knot, you can double the knots if you’d like.

Finally the wig is done. Now take the wig off the manikin head and cut it to the way you can wear In your head. Using the elastic band from your kit, stretch it from one ear to the other ear to get your measurement. Smack it with the pencial then cut it. Now sew each end of the elastic to each end of the frontal, once that is done, now we are going to move overto styling the hair. Turn the wig cap inside out and apply the products at the base of the lace to make it blend with your skin tone even more. Now place the wig on your head and hook the strap ino the loops for extra security. This is why i sewed the frontal inside. Then put the wig on, place it where it looks most natural in, take all the baby hairs out, using styler gel or any gel you have to edge control your baby hairs, and now you are ready for the night. The hair is so secured you can do anything.

So this is the end of the tutorial. Hope you all can get something in it. Any question please contact us freely.

Comment

Name
Email
Comment